Toyota Prado 150 Kit
Toyota Prado 150 Kit
REDARC Dual Battery Charger kit | Accessory Harness | Battery Tray
A complete wired under bonnet dual battery charger install kit for the Toyota Prado 150 series
Using the renowned Australian made REDARC BCDC 1225/40/50D dcdc charger and solar controller with an anderson plug to accept solar directly. The kit comes with the Redarc charger mounted on the Redarc laser cut stainless steel mounting bracket, pre wired to reach passenger side and drivers side battery location, with crimped, soldered and heat shrunk connections.
Optional Extras:
7m accessory harness to run to the rear of the vehicle and mount a socket housing. Your choice of any sockets (Cig, USB, Engel, Volt meter or Single Anderson with flip up cover) they can be customised to suit your needs. You can select your preference at checkout.
Please visit Accessory Harness product page for more details
Piranha off-road vehicle specific dual battery tray. (Manufacturer suggests this is not suitable for self fit - please see fitting guide for details of installation)
DOWNLOAD: Piranha Fitting Guide - 2009on 3.0l Diesel
DOWNLOAD: Piranha Fitting Guide - 2015on 2.8L Diesel
DOWNLOAD: Piranha Fitting Guide - 2009on 4.0L Petrol
Kit Includes:
REDARC BCDC pre wired to length to reach auxiliary and start batteries
Anderson plug for unregulated 12v solar input
Redarc bcdc steel laser cut mounting bracket
2x Midi fuse holders and fuses
All nuts bolts and screws required for install
Cable ties for attaching wiring loom
REDARC instruction booklets and sticker
Digital instructions emailed with video tutorials for install
Optional Extras:
Accessory Harness with 7m cable
Fuses, cable ties and screws to assist with installation
Piranha 150 series Battery tray with instructions
DOWNLOAD: Prado 150 Installation Instructions
DOWNLOAD: Redarc Bracket Instructions
Now available using the Redarc 1240D (40amp) and 1250D (50amp) chargers. We recommend using the 1225D (25amp) model when using lead based batteries under the bonnet such as Lead acid deep cycle or AGM as most of these batteries have a max charge current of about 30 amps. However if using Lithium batteries the 1240D or 1250D is now available in our kits.
