DIY Enerdrive 1000w pure sine wave Inverter Kit with remote EN1110s

A complete pre wired 1000w inverter kit.

This is a great add on to your existing dual battery system or to complement our universal dual battery kit.

This kit is designed for a single dual battery bank of 100-150ah. A 1000w inverter is probably the largest inverter you would want to use on a standard 100-120 ah battery due to its start up current and also its current draw while running a 1000w appliance. A high wattage inverter should be installed as close to the auxiliary battery as possible to avoid any voltage drop, Enerdrive recommend a maximum cable length of 1.5m at 35mm2. So we have given you the maximum cable length and run a 39.55mm2 cable to it. When it comes to inverter cable size, bigger is always better.

Kit Includes:

• Enerdrive En1110s 1000w pure sine wave inverter

• Remote head to turn on inverter from a more convenient location

• 150amp maxi fuse and fuse holder

• 1.5m 39.55mm2 earth cable pre wired with soldered and heat shrunk joins

• 1.5m 39.55mm2 positive cable with soldered and heat shrunk joins

• 2x insulated red and black rubber boots to protect exposed electrical connection on inverter.

• Enerdrive instruction manual